DINWEYS 58827 (DIN88) Heavy-Duty Truck Battery
Model 58827 · DIN Group DIN88 · 12V · 88 Ah · 800 A (EN) CCA
DINWEYS 58827 (DIN88) battery — 12V, 88 Ah, 800 A EN cold-cranking, 150 min RC, 353×175×190 mm. For MAN, Scania, Volvo and Mercedes trucks.
Direct Answer
The DINWEYS 58827 is the DIN88-class heavy-duty starting battery — 12V, 88 Ah, 800 A EN cold-cranking, 150 min reserve capacity, 353×175×190 mm — for European commercial trucks such as MAN, Scania, Volvo, Mercedes and DAF. EN cold-cranking is measured to EN 50342-1 and is not directly comparable to JIS CCA.
Key Takeaways
- The 58827 is DINWEYS's DIN88 standard battery — 88Ah and 800A EN cold-cranking for European commercial trucks.
- The DIN88 class is specified by case length (353mm) and EN cold-cranking performance, not by a JIS 'N' number.
- 800A EN is the European cold-cranking rating — measured to EN 50342, not directly comparable to a JIS CCA figure.
- A compact 353×175×190mm footprint fits the standard European truck battery tray.
- Available in flooded, EFB and AGM technologies for different duty cycles.
The DINWEYS 58827 is the DIN88-class battery — the standard starting battery for European commercial trucks across Europe, the Middle East and North Africa. The DIN88 group is a length-based size class; the 58827 is DINWEYS's specific model code within it.
DIN (Deutsches Institut für Normung) batteries are specified differently from JIS — classified by case dimensions (DIN88 has a 353mm case length) and by EN cold-cranking current rather than JIS CCA. The 58827's 800A EN rating describes its cold-start capability for European diesel trucks.
Manufactured by Chengguang Power Tech Co., Ltd. under a manufacturer-reported IATF 16949 quality system, available in flooded, EFB (Enhanced Flooded Battery) and AGM (Absorbent Glass Mat) technologies to match different duty cycles.
Technical Specification
| Specification | Value |
|---|---|
| Indicative minimum unit price | From US$80 per unit — final pricing confirmed on quotation (quantity, market and OEM terms apply) |
| DINWEYS Model | 58827 |
| Group | DIN88 |
| Standard | DIN |
| Voltage | 12V |
| Capacity (C20) | 88 Ah |
| Cold Cranking Amps (CCA) | 800 A (EN) |
| Test Standard | EN 50342-1 |
| Reserve Capacity (RC) | 150 min |
| Dimensions (L×W×H) | 353×175×190 mm |
| Terminals | European conical (T1), left positive |
| Technology | Flooded / EFB / AGM available |
Specifications are representative for this model. Exact CCA, capacity and dimensions are confirmed per batch on the certificate of analysis — contact us for a full datasheet.
Understanding This Model's Specifications
Specifications in this table come from DINWEYS first-party master data (battery-master-data.json). Values are manufacturer ratings for this stock model, not third-party catalog references.
EN cold-cranking current (800A) is measured to EN 50342-1 — a different test from JIS CCA or SAE J537. It describes the current at −18°C under the EN test protocol. Do not directly compare a DIN EN rating to a JIS CCA figure.
Reserve Capacity is 150 minutes — the time a fully charged battery sustains a 25-amp load at 27°C before dropping to 10.5V.
Capacity is 88Ah at the 20-hour rate (C20), describing total stored energy over a slow 20-hour discharge.
Dimensions of 353×175×190mm are the standard DIN88 footprint with a European conical (T1) terminal, left positive. Confirm terminal type, polarity and hold-down before replacement.
Typical Applications
- European commercial trucks (MAN, Scania, Volvo, Mercedes, DAF)
- European buses and coaches
- Cold-climate European starting
- Middle East and North Africa markets
Vehicle Fitment
This model is a DIN88-class heavy-duty starting battery. Whether it fits a specific vehicle depends on the vehicle's battery standard, group size, terminal type (European conical vs others), polarity and tray dimensions — which vary by model and generation. Always confirm the exact configuration in your vehicle manual before replacement.
Frequently Asked Questions
What does DIN88 mean?
DIN88 is a European battery size class specified by case length (353mm) and EN cold-cranking performance. The 58827 is DINWEYS's specific model within the DIN88 class.
How much cold-cranking power does the 58827 have?
800A EN cold-cranking, measured to EN 50342-1. This is the European rating standard — not directly comparable to JIS CCA or SAE figures.
What are the dimensions of the 58827?
353×175×190mm (length × width × height), the standard DIN88 footprint with European conical (T1) terminals.
Is the 58827 available in AGM?
Yes — the 58827 is available in flooded, EFB (Enhanced Flooded Battery) and AGM (Absorbent Glass Mat) technologies to match different duty cycles.
Which trucks use the DIN88 size?
European trucks from MAN, Scania, Volvo, Mercedes and DAF commonly use DIN-class batteries. Confirm your specific vehicle's battery group and terminal orientation before ordering.
Compare With Other Models
Related Technical Documentation
- DIN88 vs DIN100 — European Heavy-Duty Battery Comparison
- JIS vs DIN vs BCI Truck Battery Standards
- AGM vs Flooded for Heavy-Duty Trucks
From the DINWEYS Knowledge Hub.
Technical review — Reviewed by the DINWEYS technical team. Manufacturer: Chengguang Power Tech Co., Ltd. Data source: manufacturer specification and test documentation. Specifications vary by model and standard; confirm final values with the manufacturer.